Laser screeding

We offer you laser screeding of concrete, where for the final leveling of concrete is taking care with a technilogical perfect laser screed machine.



TAL-M-2 is a highworthed monolit concrete Floor, surfacely closed, is extreme resistant to mechanic loading,...



TAL-M-KORUND is a highworthed monolit concrete floor on a basis of dry mixture of cement, quartz sand and korund, witch is rub into fresh concrete surface.


Cement floor

Under concept, cement floor, we understand as a slim layed - flat cement element (thickness from 3 – 8 cm), which is made from projeting...



TAL-M-KVARC is a highworthed monolit concrete floor on a basis of dry mixture witch is rub into fresh concrete surface.



TAL-M-KVARC is a highworthed monolit concrete floor on a basis of dry mixture witch is rub into fresh concrete surface. Mixture is made of natural quartz agregates, cement, dross and other components which are making better characteristics of concrete floor. Floor is surfacely closed and doesn't absorb oils and water, is resistant to mechanic loading and to temperature oscillations.

Basic information
Floor sort: monolit concrete
Use: 5-7 kg/m2
Binding: cement
Filler: quartz agregat
Chemical resistance: conditional
Pressure hardiness: 70 N/mm2
Bending hardiness: 8 N/mm2
Grindiness: 9 cm3/ 50 cm2
Colour: grey, red, green

We spread dry mixture on a fresh concrete surface M 30 in a quantity of 5-7 kg/m2 – it dependes what is Preocupation of conrete flor. Then we rub in a mixture several times in drying concrete with special machines (power floats-trowels). Before covering with concrete, we balance metal panels on a demanded hight, then we put in wire net and on demand also PVC foil. All wall, pier and foundation connections are coated with stiropor tape.

TAL-M-KVARC is used on middle and light loading surfaces. Because of possibility to make it in colours you can also reach an estetic look. Recommended use of TAL-M-KVARC is in:
- garages and parkings
- shopping centers
- warehouses (middle and light loading surfaces)
- schoolhalls and workshops
- textile factorys
- wood industy and timber yards
- sidewalks and ramps
- car repairment workshops

The maintainence of this floor is to brush away all hard particles of the floor, cleaning with water, vacuum cleaners, detergents and disinfectants. If you want that the floor would look even better, we recommend polishing.

It's good to know

Accordation of cement floors on a sort of binding materials

Cement floor:
most usual floor in apartments and family houses.

Anhydrated and magnesium floor: this floors have limited characterristics and must be made from a specialized companies.
Cement floor: most used floor, made of sand, cement, water and additives for mortar (contruction-chemical products) depending of usage intention. The structure is thousand times checked as for preperation or treatment. Biside of that have cement floors exelent characterristics at expertive laying and drying:

• optimum humadity

• insensible to moisture

• allround usage

• inside or outside usage

• if mixed with heating material also usable for flor heating

Considering manufacturer instructios and laying instructions, can this cement floor be layed by yourself.

Selfmade recipe: reliable,concrete simular mixture, is made of 1 part of cement and 3 parts of sand (granulation 0-8 mm) mixed with water in a viscous mass. At our firm you can get additives for mortar, wich will make this floor more resistant to rubing and easier to lay on and it will make it possible to use it as a heating floor(considering manufacturer instructios from a heating system).


Sedež podjetja:
Puhova ulica 23
2000 Maribor
Pišite nam


CECOMP (Novo Mesto)-5